Granatelli Motorsports continues to develop new handling and power parts for late model muscle cars. Below are some of their newest products.
Watts Link for S197 Mustangs
Granatelli has introduced an all-new Watts Link for the new Mustang platform. The Watt's Linkage is a design that has been around since the 1700's, but has recently become popular on hardcore street and auto-cross machines. The advantages of the Watts Linkage is that produces less side-to-side movement than a typical panhard bar.
The Granatelli Watts link works on six and eight cylinder applications, including 2010 models that have a different housing.
Bolt-On "Extreme" Late-Model Mustang Sub Frame Connectors
Granatelli has long offered traditional sub frame connectors for Mustangs of all types and years. Now, GMS has introduced a new hard-core Extreme-version of it's subframe connectors which are not only bolt-in, but tie the ENTIRE chassis together.
The front link connects to the back of the K-member (can use with stock or aftermarket) and comes to the back of the car where it triangulates from the rear control arm and outside chassis reinforcement points. If you want additional stiffness, the sub frame connector can be welded in place. This is one of the most complete and extensive chassis-stiffening connectors we have seen.
Nitrous Spray Bar Cold Air Intake for Late-Model Mustangs
Granatelli has released a new S197 cold air intake that now contains a fuel and nitrous spray bar. The intake can be purchased separately or as a complete nitrous kit with the solenoids mounted on the side. Since the spray bars are after the air flow meter, you can also run a dry nitrous shot. Granatelli claims that their cold air intakes can support over 800 horsepower, and that the fuel and nitrous bars are designed for very complete atomization.
Check out
the video that we filmed on the GMS Cold Air Intake.
2009 Emission Legal Air Flow Meters for Ford Vehicles
A 2008 mass air flow meter body change in 2008 led to Granatelli’s redesign of their meters featuring a billet constructed meter body. These new air flow meters are compliant with emissions standards and are offered in various colors. Granatelli also offers a MAF sensor cleaner that evaporates so you don’t have to remove the sensor to clean. This keeps your meter clean and running at optimal performance.
More on Granatelli at:
http://www.granatellimotorsports.com/ 