A Slew of New Parts from Nitrous Express.
NX InstaBoost Turbo Lag Controller
If you have ever owned a big turbo on a smaller displacement motor, then turbo lag is nothing new to you. Nitrous Express now has a kit called InstaBoost that will turn off your nitrous after your desired boost level is met.
Their first controller is an economical version that looks like a typical fuel pressure safety switch that turns into a pressure switch for your airflow. You can adjust the nitrous to turn off between 1-8 PSI on this kit with a mechanical adjuster on the sensor.
Their second version is a full digital system. This kit uses an internal map sensor that is good for 80 PSI. The unit will also control two stages of nitrous that uses RPM or boost for dialing in your ramp. The remaining is a simple wiring harness that connects through the corresponding sensors.
NX Traction Control Progressive Controller
Tire spin can be one of the biggest enemies on nitrous fed vehicles. Nitrous Express Traction Progressive Controller can help dial in your nitrous when you experience tire spin. The kit uses a driveshaft speed sensor in relation to your engine RPM to detect the wheel spin. Once wheel spin is detected, the kit will limit the amount of nitrous flow, depending on your internal adjustment. There are two different ramps, depending of harshness of wheel spin. Adjust on the fly as well as on your computer using a USB hookup. This also has the ability of standard nitrous controller for ramping.
Maximizer III Progressive Controller
The Maximizer II has all the functions of a progressive controller that one could desire for their racecar. The problem is, it isnt cheap enough for the street/strip racer. Nitrous Express realized this and came out with a progressive controller that uses all the most important adjustments that a weekend racer needs, in an affordable package. You can even ramp the nitrous depending on how much you apply the throttle! Adjustments include:
% TPS trigger point 25-99%
Ramp Start Percent
RPM Trigger
RPM Cut Off
TPS idle voltage
TPS WOT Voltage
Number of Cylinders
12 volt Trans-brake input to disengage nitrous while on the brake
New Lightweight 10 pound composite bottle
Nitrous Express has had a composite bottle out for a number of years, but now they introduce one that is lighter then the first. These bottles are based off the same technology that firemen use for their oxygen bottles. The new weight drops 2.5 pounds over the first generation, ending at 7 pounds. This is half the weight of a traditional 10 pound bottle. The bottle is also coated with phosphorescent that will glow after subjected to a light source.
Check out more NX products at:
http://www.nitrousexpress.com