If you’ve manually shifted a factory automatic transmission, you probably spent some time looking down at the shift lever. B&M builds a ratcheting shifter that lets you keep your eyes on the road.
by Michael Harding on February 27, 2014
by Michael Harding on February 14, 2014
Flowmaster recently opened their doors to the nearly 160,000 square foot facility where they manufacture their mufflers and cat-back systems. It takes a lot of pride to produce 46,000 mufflers every month!
by Michael Harding on November 25, 2013
Making a set of headers is a little bit more involved than bending tubes and welding them together. We toured Pertronix Performance to see what it takes to turn a tube into a set of quality headers.
by Lindsey Fisher on September 26, 2013
Focused on modern Mustangs, 281 Motorsports is all about outfitting Mustangs with the ultimate performance parts. Earlier this month, they celebrated what they do best at an open house.
We got the opportunity to check out the inner workings at the Ron Francis Wiring facility in Pennsylvania, and chat with the owner, Scott Bowers, about how he brings the company’s large product line to life.
Heidts Automotive Group has been helping musclecars and street rods handle the bumps in the road, and helping them handle the autocross tracks with IFS and IRS systems. We visited their facility to see what they do, and how they do it. Take a look inside.
Tom Nelson’s expertise with twin-turbo engines and other boosted applications is quite celebrated. Follow along as EngineLabs takes a tour of Nelson Racing Engines and learns a few of his secrets.
by Jason Reiss on March 11, 2013
We recently got a firsthand look at the ProTorque Converters facility and had the chance to chat with ProTorque’s main man, Joe Rivera, Jr. about his company’s philosophy towards racing. Check out the details inside.
by Rob Kinnan on December 3, 2012
Point at any high-end race car and most car and truck builds, and you’ll be able to find ARP fasteners on it. The team at ARP in California recently invited is in for a tour of their facility, check it out here!
JPC Racing in Maryland held their 2012 Fall Dyno Day recently. Dino Rallis lit up the screen with 936 rear-wheel horsepower from his street car to take the top spot in the shootout.
by Mary Lendzion on October 18, 2012
We head to Dearborn Heights Michigan, to get inside access to Livernois Motorsports’ massive 36,000 square foot facility. We sat down with Engine Department Supervisor Mike Schropp for the low down on this mechanical Mecca.
by Andrew Wolf on September 5, 2012
Like countless other speed shops around the country, Brenspeed has its own unique story of challenges and humility as it’s transitioned from a part-time venture in a farmhouse to its current 20,000 square foot digs in rural Pierceton, Ind.
If you’ve been to the drag strip, chances are pretty good you’ve seen Dart parts in action. We take a first hand look at how this company keeps innovating and producing top quality products for racers and street enthusiasts, while building their products here in the USA.
by Andrew Wolf on July 5, 2012
From billet aluminum fuel pumps and radiators to NASCAR engines in a dragster, join us as we take an all-access tour of the Aeromotive offices and manufacturing facility in Lenexa, Kansas.
The innovative team at Accessible Technologies Inc., the name behind the ProCharger supercharger brand, opened their doors to the powerTV team, allowing us a virtually all-access look inside the design, manufacturing, and assembly process that goes into their self-contained supercharger systems.
by Andrew Wolf on March 16, 2012
Weld Racing recently invited us inside their production facility in Kansas City, Missouri – just a stones throw from where the Kansas City Chiefs and Royals play ball – to see how one of the most recognizable and respected brands in the racing industry constructs the wheels used by racers all across the globe.
by Kevin Shaw on March 5, 2012
We visit American Racing to see how the legendary hot rod wheel manufacturer went about creating possibly the single-most iconic drag racing and muscle car wheel in the industry and how they’re continuing to make new legendary designs.
by Andrew Wolf on February 27, 2012
The team at Jet-Hot recently opened the doors to their corporate offices and primary coating facility in Burlington, N.C. to powerTV, allowing us to take an all-access tour of the coating facility and its intricate processes, allowing us to share with you what goes on behind closed doors.
by Andrew Wolf on February 3, 2012
Recently, the good folks at AFCO Racing Products and Dynatech invited us to tour their manufacturing facilities to get a behind-the-scenes look at – and share with our readers – something that most will never get to see.
Get the most up to date news & articles directly in your inbox from StangTV!
We will never share your email address
by Bobby Kimbrough on January 10, 2012
What is the magic behind Total Cost Involved Engineering? We took a trip to their factory to find out. From top to bottom, the company has a unique business plan and philosophy that pays off for project car builders. Read more about it here.